Power Circuit Breakers

for safety and protection

Power Factor Correction

PFC - Power Factor Correction

UK Market Only

Terasaki is the exclusive UK distributor of a complete range of products and systems for low, medium and high voltage power factor correction. If you are outside the UK Contact us for details of local suppliers.

We have a huge range of affordable modular cassettes for switchboard installation and prefabricated freestanding capacitor banks.

We hold a full stock of modular cassettes which we can despatch next day.

Easy Installation of Power Factor Correction equipment Guide to PFC selection...

Loose Power Factor Correction

Terasaki/Enerlux three phase PRT capacitors are self-healing and consist of three single-phase elements made of metalised polypropylene film with a delta connection in a cylindrical casing of extruded aluminum. The fixing spigot is M12 x 12 mm and is used to earth the capacitor.

The capacitor is enclosed with a steel disc on the aluminum casing, ensuring a perfect air and water seal. The capacitors are designed with an overpressure disconnecting safety device. This protection immediately cuts off the power supply to the capacitor in the event of a fault due to excessive overvoltage. A fiberglass reinforced mount supports the three connection terminals. We recommend you leave at least 25 mm clear space above the connection terminals to allow the overpressure device to work properly.

All capacitors are manufactured to the highest standard (IEC 60834-1/2) ensuring excellent duty and performance.

Easy Installation of Power Factor Correction equipment

Wall-mounted and free-standing units allow simple addition of power factor correction to an existing system.


Standard modular cassettes for switchboard installation.

Easy to install with busbar or cable connections available


Our new small cassettes have been designed to be installed extremely easily. The units offer a 70% reduction in width compared with standard PFC modules. This will minimizing the switchboard size, and save costs.


Automatic power factor regulator with up to 6 or 12 steps.

Regulator models ECEPF 8T and ECEPF 12T monitor the temperature of the PFC units and have automatic cut out facilities.

Standard Modular Cassettes
 
Small Cassettes

Guide to PFC selection

Steps
Total kvar
Order Code with busbar connections
Order Code with cable connections
Order Code with busbar
connections and reactor
With cable connections
1
     12.5
   
ECCTF40112
 
1
  25
ECCT40125
ECCTX40125

ECCTF40125

ECCTT40125

2
  25
   
ECCTF40212
 
1
  50
ECCT40150
ECCTX40150
ECCTF40150
ECCTT40150
2
  50

ECCT40225

ECCTX40225
   
3
  75
ECCT40325
ECCTX40325
   
2
100
ECCT40250
ECCTX40250
   
4
100
ECCT40425
     

Wall-mounted Power Factor Correction Equipment is available from 20-175 KVAR

Free-standing Power Factor Correction Equipment is available from 100-500 KVAR

Download Terasaki Power Factor Correction PL0809 for order codes for wall-mounted and free-standing equipment.


Back to top